1. Multi-grid technology, shortening the current conduction distance on the thin grid by more than 50%, reducing the internal resistance loss of the cell by 15%. 2. Double-sided solar radiation absorption, double-sided rate of up to 70%, significantly increasing the equivalent power of the module. 3. Compact and easy to install, designed to be compatible with existing conventional system components. 4. Suitable for high temperature, high humidity and temperature differences in a variety of complex environmental areas.
1. 2mm thick heat-tempered glass is used on both sides of the module, with a 30-year module performance warranty. The new material POE encapsulation effectively improves the bonding force, voltage and insulation resistance and weather resistance in complex environments. 166*83mm welded cell size and 6*20Pcs arrangement make the modules easy to install and transport, making them more suitable for small home system installation.Maximum system voltage: 1000V/1500V
2. The aluminium alloy frame has an oxide film thickness of over 13 microns and a hardness of over 12HW, which effectively increases the impact resistance and outdoor weather resistance of the double-glazed modules. Double-sided glass gives the modules a better sealing performance, effectively increasing the module life. The three split glue-filled junction boxes with three diodes of 20A or more provide better heat dissipation performance, TUV 1500V DC voltage certification and IP68 protection level provide safer use.
3. Using N-type 166mm high efficiency double-sided power generation topcon technology monocrystalline cells, the technology is constantly upgraded, constantly improving conversion efficiency and reducing production costs. Bifacial power modules can increase backside power output on concrete, water, sand and metal surfaces. The continuous improvement of the production process will make N-type topcon bifacial technology a popular product in the module market in the future, with a bifacial power gain of up to 30%, saving you more system electricity costs.
4. The outer box can be personalised according to the customer's requirements, giving the customer more options. At present, 37 PCS are packed in vertical rows in one outer box, and the components are separated from each other by paper corners to prevent metal collision and friction during transportation. The packaging is tightened with multiple plastic straps inside and outside, making the components safer during long distance sea and land transportation.Packing: 37pcs/pallet, 962pcs/40"HQ
5. The following specifications for our 166mm 120 cells conventional size battery pack can be downloaded at any time by clicking on the link.